Air conditioning
Air conditioning not cooling properly: causes and when to call a technician
Is your air conditioning no longer cooling properly? Explore possible causes, simple checks and when a professional assessment is needed.
Briseon · 3 september 2026 · 4 min read
An air conditioner that runs but no longer cools the room properly does not necessarily have a major fault. Settings or dirty filters may be responsible. Other cases need technical investigation. Different problems can cause similar symptoms, so avoid jumping to conclusions.
1. Check the settings first
Start with the controller. Is the unit in cooling mode, usually shown by a snowflake or “COOL”? Check the set temperature, fan speed, timers and selected operating mode. Close windows and doors.
Fan-only mode moves air without actively cooling it. A temperature set too high can also make the unit appear to be underperforming.
2. Dirty filters can restrict airflow
Indoor unit filters collect dust and particles. When they become clogged, less air passes through and the system may need to run longer to reach the desired temperature.
On many wall-mounted models, you can carefully remove and clean the filters following the manufacturer’s instructions. If airflow remains weak with clean filters, dirt may have accumulated deeper inside the unit.
3. The heat exchanger may be dirty
The heat exchanger sits behind the filters. Dirt can build up over time, affecting airflow and heat transfer. The fan wheel can also become dirty, particularly with intensive use.
These parts are harder to reach and may require partial dismantling. Deep cleaning is best left to a professional.
4. Is the room hotter than usual?
An air conditioner is selected for a particular cooling load. Large sunny windows, poor insulation, frequently opened doors, high occupancy, heat-producing equipment and exceptional outdoor temperatures can increase that load.
If the system struggles only in extreme conditions, it is not necessarily faulty. A clear drop in performance under normal conditions deserves further attention.
5. Check the outdoor unit
The outdoor unit must be able to release heat. Visually check that leaves, plants, stored materials or dirt do not obstruct its air inlet or outlet.
Its heat exchanger can also become dirty. Do not clean fragile fins with stiff brushes or a powerful pressure washer: damaged fins can further restrict airflow.
6. The air is moving but is not cold enough
If airflow is adequate but cooling is weak, a technician can assess return and supply air temperatures, indoor and outdoor unit operation, electrical performance, error codes, heat exchangers and the refrigeration circuit.
The difference between return and supply air temperatures is often called Delta T (ΔT). It is useful information, but must be interpreted alongside indoor temperature, humidity, fan speed and room load. This measurement alone is not a complete diagnosis.
7. Does weak cooling mean low refrigerant?
Not necessarily. A correctly installed air conditioner has a closed refrigeration circuit. Refrigerant is not a consumable that should routinely be topped up at every service.
If refrigerant is genuinely missing, the cause must be investigated. A leak is one possibility, but reduced cooling can also result from dirt, poor airflow, electrical faults, sensors or settings. Adding refrigerant without investigating the cause is not sound diagnosis.
8. Ice on the indoor unit or pipework
Ice formation needs investigation. It can have several causes and does not automatically identify one particular fault. Do not keep running the system in this condition for an extended period. Have the cause checked before returning to intensive use.
9. Record error codes and other symptoms
Depending on the model, a fault may appear as a controller code, flashing light, app message or automatic shutdown. Note the code before switching the unit off.
Also mention unusual noise, vibration, smells, water leaks and repeated shutdowns. This information helps a technician focus the investigation.
10. What can you check yourself?
Without technical dismantling, check the mode, set temperature, filter cleanliness, airflow, windows and doors, outdoor ventilation space and visible error codes.
Do not open the refrigeration circuit or remove electrical covers unless you have the necessary training and authorisation.
When should you call a technician?
Arrange a professional check if simple checks do not solve the problem, especially with a sudden loss of cooling, repeated shutdowns, error codes, ice, unusual noise, weak airflow despite clean filters or water leaking from the indoor unit.
Maintenance cannot prevent every fault, but it can identify dirt and some abnormalities earlier. It may include filters, heat exchangers, condensate drainage, visible pipework and general operation. See our articles on what professional servicing includes and why regular annual care matters.
Have your air conditioning checked by Briseon
If cooling has noticeably declined and simple checks do not help, Briseon can assess the system as a whole. Relevant checks and measurements are carried out and findings clearly recorded, before replacing a part or adding refrigerant without understanding the cause.
Contact Briseon or request a quote through our website.
Comfort. Perfected.
Need advice about your installation?
Tell us what you need and we’ll assess the options for your home or business.
